Dell EMC PowerEdge R650 Installation And Service Manual page 152

Table 46. BOSS S2 kit components
R6525 (quantity)
1
3
1
1
1
1 or 2*
1 or 2*
2
2
1
1
For more information on removal and installation of BOSS S2 bland and card see
NOTE: Installing the BOSS S2 card carrier does not require the system to be powered off. System shutdown is only
required when installing the BOSS S2 controller card module.
NOTE: Connect the BOSS signal cable and BOSS power cable after inserting the BOSS S2 controller card module into the
system.
NOTE: Removal of the BOSS S2 card carrier does not require the system to be powered off. System shutdown is only
required when removing the BOSS S2 controller card module.
NOTE: Disconnect the BOSS signal cable and the BOSS power cable before lifting the controller card module from the
system.
152 Upgrade Kits
Components in kit
BOSS cover
M3 x 0.05 x 4.5 mm screws
BOSS signal cable
BOSS power cable
BOSS-S2 controller card
module
BOSS-S2 card carrier
M.2 SSD
M.2 240 GB information label
M.2 480 GB information label
BOSS card filler
Tech sheet
optional BOSS S2 module topic.