Installing The Idsdm Module - Dell EMC PowerEdge R650 Installation And Service Manual

Figure 104. Removing the IDSDM module
Next steps
1. Replace the IDSDM module.

Installing the IDSDM module

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Locate the IDSDM connector on the system board.
To locate IDSDM module, see the
2. Align IDSDM module with the connector on the system board.
3. Press the IDSDM module until it is firmly seated in the connector on the system board.
Safety instructions.
Before working inside your
System board jumpers and connectors
system.
section.
Installing and removing system components 119