Optional Idsdm Module; Removing The Idsdm Module - Dell 34PR7 Installation And Service Manual

Figure 72. Installing the power interposer board
3. Reconnect all the required cables.
Next steps
1. Install the PSU.
2. Install the air shroud.
3. Follow the procedure listed in

Optional IDSDM module

Removing the IDSDM module

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. If you are replacing the IDSDM card,
NOTE: Before removing the SD cards, label them temporarily with the corresponding slot numbers. Reinstall the SD
cards into the corresponding slots.
Steps
Holding the blue pull tab, lift the IDSDM card out of the system.
After working inside your
Safety instructions.
Before working inside your
remove the MicroSD
system.
system.
cards.
Installing and removing system components 77