Left Control Panel View - Dell EMC PowerEdge R650 Installation And Service Manual

Left control panel view

Figure 5. Left control panel without optional iDRAC Quick Sync 2.0 indicator
Figure 6. Left control panel with optional iDRAC Quick Sync 2.0 indicator
Table 5. Left control panel
Item Indicator, button, or
connector
1 Status LED indicators
System health and system ID
2
indicator
iDRAC Quick Sync 2 wireless
3
indicator (optional)
NOTE: For more information about the indicator codes, see the
12 Dell EMC PowerEdge R650 system overview
Icon Description
N/A Indicates the status of the system. For more information, see the
indicators section.
Indicates the system health. For more information, see the
and system ID indicator codes
Indicates if the iDRAC Quick Sync 2 wireless option is activated. The Quick
Sync 2 feature allows management of the system using mobile devices.
This feature aggregates hardware/firmware inventory and various system
level diagnostic/error information that can be used in troubleshooting the
system. You can access system inventory, Dell Lifecycle Controller logs or
system logs, system health status, and also configure iDRAC, BIOS, and
networking parameters. You can also launch the virtual Keyboard, Video, and
Mouse (KVM) viewer and virtual Kernel-based Virtual Machine (KVM), on
a supported mobile device. For more information, see the Integrated Dell
Remote Access Controller User's Guide at
section.
www.dell.com/poweredgemanuals
System diagnostics and indicator codes
Status LED
System health
section.