Chapter 2: Dell Emc Poweredge R650 System Overview; Front View Of The System - Dell EMC PowerEdge R650 Installation And Service Manual

Dell EMC PowerEdge R650 system overview
The Dell EMC PowerEdge R650 system is a 1U server that supports:
rd
● Up to two 3 Generation Intel Xeon Scalable processors, with up to 40 cores per processor
● 32 DIMM slots
● Two redundant AC or DC power supply units
● Up to 4 x 3.5-inch, 8 x 2.5-inch SAS/SATA drives, 10 x 2.5-inch drives (with two or four universal slots to support optional
NVMe drives) or 10x 2.5-inch NVMe drives only.
NOTE: For more information about how to hot swap NVMe PCIe SSD U.2 device, see the Dell Express Flash NVMe PCIe
SSD User's Guide at https://www.dell.com/support> Browse all Products > Data Center Infrastructure > Storage
Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Documentation > Manuals and
Documents.
NOTE: All instances of SAS, SATA, NVMe drives are referred to as drives in this document, unless specified otherwise.
CAUTION: Do not install GPUs, network cards, or other PCIe devices on your system that are not validated
and tested by Dell. Damage caused by unauthorized and invalidated hardware installation will null and void the
system warranty.
For more information, see the Dell EMC PowerEdge R650 Technical Specifications on the product documentation page.
Topics:
•

Front view of the system

• Rear view of the system
• Inside the system
• Locating the Express Service Code and Service Tag
• System information label
• Rail sizing and rack compatibility matrix
Front view of the system
Figure 1. Front view of 4 x 3.5-inch SAS/SATA drive system
Table 1. Features available on the front of the system
Item Ports, panels, and
slots
1 Left control panel
8 Dell EMC PowerEdge R650 system overview
Icon Description
N/A Contains the system health, system ID, status LED, and the
iDRAC Quick Sync 2 (wireless) indicator.
● Status LED: Enables you to identify any failed hardware
NOTE: The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
components. There are up to five status LEDs and an overall
2