Dell EMC PowerEdge R650 Installation And Service Manual page 75

Steps
1. Place the processor in the processor tray.
NOTE: Ensure the pin 1 indicator on the processor tray is aligned with the pin 1 indicator on the processor.
2. Place the processor carrier on top of the processor that is in the processor tray aligning pin 1 indicator on the processor.
NOTE: Ensure the pin 1 indicator on the bracket is aligned with the pin 1 indicator on the processor before placing the
bracket on the processor.
NOTE: Before you install the heat sink, ensure to place the processor and carrier in the tray.
Figure 60. Installing the processor carrier
3. Align the processor with processor carrier, by using the fingers press the carrier on all the four sides until it clicks into place.
NOTE: Ensure the processor is securely latched to the processor carrier.
Installing and removing system components 75