Installing The Air Shroud - Dell EMC PowerEdge R650 Installation And Service Manual

Figure 23. Removing the air shroud from the rear drive module
Next steps
1. Replace the air shroud.

Installing the air shroud

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Holding the edges of the air shroud, align the slot on the air shroud with the standoff on the system.
2. Lower the air shroud into the system until it is firmly seated.
NOTE: Air shroud is not supported for T-type heat sink and liquid cooling configurations.
38 Installing and removing system components
Safety instructions.
Before working inside your system.