Installing The Expansion Card Risers - Dell EMC PowerEdge R650 Installation And Service Manual

Next steps
1. Replace the expansion card

Installing the expansion card risers

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. If removed, install the expansion cards into the expansion card
Steps
1. Holding the edges or the touch points, align the holes on the expansion card riser with the guides on the system board.
2. Lower the expansion card riser into place and press the touch points until the expansion card riser connector is fully seated
on the system board connector.
Figure 78. Installing the expansion card riser (Riser 1)
riser.
Safety instructions.
Before working inside your system.
risers.
Installing and removing system components 97