Middle Parts Of Engine Installation - Linhai M565Li T3 EFI Service Manual

CHAPTER 3 ENGINE
the removal procedure, special attention
as follows:
Caution: Without any grease in belt,
drive and driven pulley

Middle parts of Engine Installation

Crankcase (right), Front output shaft,
Driven Bevel Gear
● To install Crankcase(right),Front output
shaft, Driven Bevel Gear and fasten bolt
as standard torque, Detail as picture
indication.
Front output shaft nut(1)
standard torque ：95~100N .m
Driven Bevel Gear Seat erection bolt
(8)standard torque:40N.m
M565Li T3 EFI SERVICE MANUAL 20.0
Shifting Drum, Shifting fork, Drive layshaft
● Insert the shifting fork into the sliding sleeve,
then install the drive layshaft, shifting fork,
shifting drum into crankcase(left)
Main Shaft
● Install the Mail Shaft
CHAPTER 3 ENGINE PAGE. 3-
94