Replacing Coolant - Linhai M565Li T3 EFI Service Manual

CHAPTER 3 ENGINE
per and the lower limit on the reservoir tank.
If the level is below lower limit, fill coolant
until the level reaches the upper limit.

Replacing Coolant

● Remove radiator cap (1) and reservoir
tank cap (2)
● Place a pan below water pump, and
drain cool- ant by removing drain plug (3)
and water hose (4)
Warning:
Do not open radiator cap when engine is
hot, you may be injured by escaping hot
liquid or vapor.
Engine coolant is harmful. If coolant
splashes in your eyes or clothes,
thoroughly wash it away with water and
consult a doctor. If coolant is swallowed,
induce vomiting and get immediate
medical attention.
K l t
● Drain coolant from reservoir tank.
● Clean radiator with fresh water, if
necessary.
● Connect water hose (4)，and tighten
clamp (3) securely
● Fill the fresh specified coolant into the
radiator
● Loosen bleed bolt (5)，on water pump,
when coolant flow from bleed bolt, tighten
the bolt. Install radiator cap (1) securely
after filling coolant.
f h f
M565Li T3 EFI SERVICE MANUAL 20.0
2
4 3 5
CHAPTER 3 ENGINE PAGE. 3- 31