CHAPTER 3 ENGINE
standard requirement.
Drive Shaft Inspection
● To inspect gear surface for hard spot,
damage, excessive wear. Replace it if
necessary.
Drive layshaft Combination
● To remove the layshaft as picture
● To inspect gear surface for hard spot,
damage, excessive wear.
To inspect bearing and bush for damage
Note: Rear Retainer couldn't reuse after
removed. Must to be replaced by new one
or wear. Replace it if necessary.
Shift Drum, Shifting Fork
M565Li T3 EFI SERVICE MANUAL 20.0
CHAPTER 3 ENGINE
PAGE. 3-
86