Front Output Shaft, Driven Bevel Gear - Linhai M565Li T3 EFI Service Manual

CHAPTER 3 ENGINE
● Remove right crankcase bolts
● Separate crankcase carefully with
rubber hammer knocking the case

Front Output Shaft, Driven Bevel Gear

● Remove nut of Real output coupler( 1)
● Remove bevel gear cover bolt
● Remove driven bevel gear (2)
Caution:
Do not damage the seal surface of
right/left crankcase when separating
Crankshaft should remain in the left
crankcase half.
M565Li T3 EFI SERVICE MANUAL 20.0
CHAPTER 3 ENGINE PAGE. 3- 45