Engine Cool Ant Temperature Sensor - Linhai M565Li T3 EFI Service Manual

CHAPTER 3 ENGINE
DO NOT: Apply any voltage other than system
voltage for testing.
DO NOT: Apply excessive band clamp loading
DO NOT: Remove packing in a way that allows
contact between parts.
DO NOT: Release the throttle cam abruptly
from any position without the throttle linkage
attached.
DO NOT: Let the by pass holes be blocked by
dirt or foreign particles.
DO NOT: Rake, stage, or handle parts in a
manner that allows contact between parts.

Engine Cool ant Temperature Sensor

3.5.4
3.5.4.1 Description and Working Principle
This sensor is used in water cooled engines. It provides a resistance that varies as a
function of temperature within prescribed tolerance limits. The sensor has a
negative temperature coefficient of resistance. This is a non-serviceable part.
3.5.4.2 Appearance
3.5.4.3 Installation Requirements
M565Li T3 EFI SERVICE MANUAL 20.0
Damage could occur
Damage could occur.
Minimum air leakage could be affected and/or
other damage could occur.
Damage could occur.
This could effect idle stability
Damage will occur.
CHAPTER 3 ENGINE PAGE. 3- 114