Linhai M565Li T3 EFI Service Manual page 183

CHAPTER 3 ENGINE
Timing Chain Tensioner
●
Insert flat head screw driver into the end
of tensioner groove, rotate clockwise and
lock tensioner spring
● Install timing chain tensioner and new
seal gasket (1)
● Install fixed bolt (2) and fasten it to the
specified torque
Chain tensioner bolt specified torque:
10N.m
● after installing tensioner, use flat head
screw driver to rotate it anticlockwise and
make the spring press the tensioner adjuster
to compress timing chain.
● Install new gasket 3
● Install tensioner screw to the specified
torque；
Tensioner screw specified torque:
M565Li T3 EFI SERVICE MANUAL 20.0
CHAPTER 3 ENGINE PAGE. 3-
112