Brakes Specifications; Brake System Service Notes - Linhai M565Li T3 EFI Service Manual

CHAPTER 6 BRAKES
6.1 SPECIFICATIONS
Item
Brake Pad Friction material
Thickness
B rake Disc Thickness
Brake Disc Thickness Variance
Between Measurements
Brake Disc Runout
Item
hydraulic
Brake Pad
Friction Hydraulic with
material mechanics park
Thickness
mechanics park
Brake Disc Thickness
Brake Disc Thickness
Variance
Between Measurements
Brake Disc Run out
6.2 TORQUE
Item
Front Caliper Mounting Bolts
Rear Caliper Mounting Bolts
Master Cylinder Mounting Bolts
Master Cylinder Reservoir Cover Bolts
Hand Brake Hose Banjo Bolt
Front Brake Disc
Front Wheel Mounting Nuts

6.3 BRAKE SYSTEM SERVICE NOTES

It is strongly recommended always change the caliper and (or) the master cylinder as an
assembly. The parts inside maybe not interchangeable due to different brake manufactures
and (or) different brake type.
Do not over – fill the master cylinder fluid reservoir.
Make sure the brake lever and pedal returns freely and completely.
Front Brake Caliper
Standard
0.157"/ 4mm
0.150- 0.164"/3.810- 4.166m
m
-
-
Rear Brake Caliper
Standard
0.157"/ 4mm
0.236"/ 6mm
0.197"/ 5mm
0.177-0.187"/4.496-4.750m m
-
-
(ft. lbs. except where noted*)
M565Li T3 EFI SERVICE MANUAL 20.0
0.140"/3 .556m m
0.002 "/ .051m m
0.005 "/ .12 7m m
0.167"/4.242mm
0.002 "/ 0.051m m
0.005 "/ 0.12 7m m
Torque
18.0
18 .0
*55 in. lbs
*5 in. lbs
15 .0
18 .0
20 .0
CHAPTER 6
Service Limit
0.04"/ 1mm
Service Limit
0.04"/ 1mm
Torque
(Nm )
25
25
6.0
.6
21
2 5
27
BRAKES PAGE. 6- 2