Linhai M565Li T3 EFI Service Manual page 40

CHAPTER 3 ENGINE
When it is necessary to run the engine indoors, make sure that exhaust gas is
·
forced out doors.
When working with toxic or flammable materials, make sure that the area you
·
work in is well ventilated and that you follow all of the manufacturer's instruction.
Never use gasoline as a cleaning solvent.
·
To avoid getting burned, do not touch the engine, engine oil, radiator, and
·
exhaust system until they have cooled.
After servicing the fuel, oil, engine coolant, exhaust or brake system, check all of
·
the lines, and fittings related to the system for leaks.
In order to protect the environment, do not unlawfully dispose of motor oil,
·
engine coolant or parts no longer used.
Warning：
If parts replacement is necessary, replace the parts with LINHAI
·
genuine parts or their equivalent.
When removing parts that are to be reused, keep them arranged in an
·
orderly manner so that they may be reinstalled in proper order.
Be sure to use special tools when instructed.
·
Make sure that all parts used in reassembly are clean. Lubricate them
·
when specified.
Use the specified lubricate, bonds, or sealants.
·
When tightening bolts, screws and nuts, tighten the larger sizes first.
·
Always tighten the nuts and bolts from the inside working out,
diagonally and to the specified torque.
Use a torque wrench to tighten fasteners to the specified torque. Wipe off
·
grease and oil if a thread is smeared with them.
After removing the parts, need to double check them, cleaning all the
·
parts before measure
M565Li T3 EFI SERVICE MANUAL 20.0
CHAPTER 3 ENGINE PAGE. 3- 1 3