Inspection Of Fan Motor; Radiator Hose Inspection - Linhai M565Li T3 EFI Service Manual

CHAPTER 3 ENGINE

Radiator Hose Inspection

● Check radiator hoses leakage or
damage. If the hoses are leakage and
damaged, replace them
● Check tightening of clamps. Replace the
clamps if necessary
● After inspection and cleaning of radiator
and hoses, check coolant level. Fill coolant
if necessary

3.4.5 Inspection of Fan Motor

● Remove fan motor from radiator
● Turn the vanes and check if they can
turn smoothly
● Check fan motor. Make sure that the bat-
tery applies 12 volts to the motor and the
M565Li T3 EFI SERVICE MANUAL 20.0
motor will run at full speed while the amme- ter will
indicate the ampere not more than 5A. If the
motor does not work or the am- pere exceeds the
limit, replace the motor
● Installation: Apply a little thread locker to the
bolts and tighten to the specified torque.
Fan Motor Bolt Tightening Torque:
10N·m
CHAPTER 3 ENGINE
95
PAGE. 3-