Linhai M565Li T3 EFI Service Manual page 313

CHAPTER 7 ELECTRICAL
*
7. Pickup coil resistance
 Disconnect the pickup coil coupler
from the wire harness.
Connect the pocket tester (Ω 100) to
the pickup coil coupler.
Tester (+) lead →
BI/Y Terminal 
Tester (- ) lead→
B/R Terminal 
 Check the pickup coil has the
specified resistance.
Primary coil resistance:
115 -145Ω (20℃)
MEETS
SPECIFICATION
8.Main switch
CHECK SWITCHES
CONTINIUTY
9.Engine stop switch ( for USA
model)
CONTINIUTY
10.Wiring connection
Check the connection of the
entire ignition system
Refer to "CIRCUIT DIAGRAM".
CORRECT
Replace the igniter unit.
M565Li T3 EFI SERVICE MANUAL 20.0
OUT OF SPECIFICATION
Replace the pickup coil.
NO CONTINUITY
Replace the main switch
NO CONTINUITY
Replace the handlebar switch.
POOR CONNECTIONS
Correct
CHAPTER 7 ELECTRICAL PAGE.7- 9