Driven Pulley Inspection - Linhai M565Li T3 EFI Service Manual

CHAPTER 3 ENGINE
●
Slowly loosen tool handle to release the
spring tension and remove the special
tool;
Remove cam;
Remove guide pin;
Remove spring and sliding sheave of
driven pulley.

Driven Pulley Inspection

Driven Pulley Fixed Sheave Inspection
●
Check driven pulley faces for any
abnormal conditions, such as heavy wear
M565Li T3 EFI SERVICE MANUAL 20.0
1. Cam
2.Guide Pin
3.Spring
Sliding Sheave of Driven Pulley
4.
CHAPTER 3 ENGINE PAGE. 3-
65