Table of Contents
Advertisement
Interface
Miscellaneous keys
Figure 20. Miscellaneous keys
The 'Read' key is used to start an analysis (see 'Calibrate the method' - Page 86
and 'Sample measurement' – Page 88).
The Reslope key is used to select the reslope standard, and to perform a reslope
operation (see 'Reslope the calibration' - Page 87).
Navigating the interface
Changing pages
Press the required 'Page' Key. Changes made on a given page are only
downloaded and executed when another page is selected.
The exception to this is when changing back and forth between the Load Method
page and the Instrument Parameters page. The parameters are not downloaded at
this time, allowing you to load a method and edit the instrument parameters
simultaneously. Open another page for the Load Method and Instrument
Parameter page changes to be enacted.
Selecting menus
Command menus are single-level menus appearing in the left of the screen. Use
the 'Up' and 'Down' keys to move from one item to the next, and, if necessary,
press 'Enter' to select the desired option.
56
Agilent 55B AA Spectrometer User's Guide
Advertisement
Table of Contents
