5-5. Projector Startup
After performing the marriage, start up the projector from GUI.
1. Tap [Power|ON].
Screen example
The Projector Lamp Control screen is displayed.
2. Tap [Power|ON].
The MAIN indicator lights up in green and the LAMP indicator blinks in green.
When the projector is started, the LAMP indicator stops blinking and stays lit. Then, MAIN indicator
and LAMP indicator are lit in green.
n
If the projector does not start, check if an error message is displayed on the GUI screen. If the mes-
sage is displayed, take measures according to the message.
3. Tap [Close] to close the Projector Lamp Control screen.
5-6. Screen Adjustment Flow
The image adjustment flow (example) in the typical theater is described. The image adjustment (image
size (zoom), focus, image position, brightness) for the flat, scope and HD contents are performed, and
then they are registered in the function memory respectively. After that, perform the color space conver-
sion for the color space to be used.
SRX-R515P
[Power|ON]
[Power|ON]
5-13 (E)