Sony SRX-R515P Installation Manual page 76

3. Project the test pattern in the Test Pattern pane. (Frame Adjust)
4. Loosen the four optical axis adjustment lock screws by two turns or more.
5. Adjust so that the image for the left eye (green image) is projected from the lower lens and the image
for the right eye (magenta image) is projected from the upper lens by rotating the optical axis adjust-
ment screw.
6. Tighten the four optical axis adjustment lock screws. (Tightening torque: 2.0 N.m)
Optical axis adjustment screw
5-26 (E)
Optical axis adjustment
lock screws (4 pcs)
OK
n
The green light beam is
output from the upper lens.
NG
SRX-R515P