Sony SRX-R515P Installation Manual page 137

5. With the lock button pushed all the way in (lock released), raise the lens fixing lever toward the "
side.
n
If you raise the lens fixing lever without pushing the lock button, the lock button and lens fixing lever
will be damaged. Be sure to push the lock button and check that the lock is released before raising the
lever.
6. Move the 2D lens back and forth several times while holding the handle, and check that the lens shift
pins can be smoothly inserted into and removed from the holes on the lens side.
If the lens shift pins cannot be smoothly inserted into and removed from the holes, perform the fol-
lowing adjustment.
1) Adjust the projector panel and base plate assembly so that they are perpendicular (90°) to each
other by referring to step 18 in Section 6-2.
2) Perform "6-3-2. Height Adjustment of 2D Unit Assembly".
2D lens
SRX-R515P
Lock button
Holes
Handle
Lens fixing lever
Lens shift pins
"
6-17 (E)