Sony SRX-R515P Installation Manual page 96

n
Set a projector in a standby state.
To enter the standby state, enter a Projector Control screen in the order of "Status" tab → [Auditorium]
→ [Projector], then tap [Standby].
[Standby]
Screen example
2. Press the [Alt] + [F4] keys on the USB keyboard and display a computer screen.
3. Right-click on the desktop screen and select "Open in Terminal".
Screen example
4. Execute the command below and open "SMSMgrServer_custom.ini".
#vi/home/sms/apps/conf/SMS/SMSMgrServer_custom.ini
5. When changing an ini file, move the cursor to the line to be changed, then press the [i] key on the
USB keyboard. The current state then enters the edit mode.
6. Press the [Esc] key on the USB keyboard, enter ":wq", and press the [Enter] key.
The contents of change are saved and the edit mode is terminated.
7. Execute the command below to reboot this system.
#reboot
8. Remove the USB mouse and USB keyboard.
5-46 (E)
Right-click,
then select it.
SRX-R515P