Sony SRX-R515P Installation Manual page 133

2. Tighten the four hexagon socket head cap bolts evenly while lifting up the 2D unit assembly so that
there is no clearance at both right and left ends of the portions A and B when visually checked.
m
. If there is any clearance in portions A and B, the lens cannot be installed and removed smoothly.
Adjust the height so that the parts come in contact with each other lightly while checking the con-
tact pressure by moving the lens base back and forth.
. The lens base is raised when the hexagon socket head cap bolts are rotated in clockwise direction
(2).
2D unit assembly
2D lens
Lens base
Portion A
2D unit assembly
SRX-R515P
Hexagon socket
head cap bolts
(6 x 40)
Portion B
2D lens
Hexagon socket
head cap bolts
(6 x 40)
6-13 (E)