Sony SRX-R515P Installation Manual page 33

4. Apply solder to the end of the ground wire.
5. Attach the ground terminal removed in step 3 to the ground wire, then fix it with the screw.
Ground terminal
6. Route the power cord through the hole on the bottom of the terminal block, then fix each terminal
with the screw as shown in the illustration.
7. Fix the power cord using the cable clamp and screw.
8. Attach the terminal block cover.
SRX-R515P
Screw
Apply solder.
Ground wire
Power cord
Cable clamp
Ground terminal
Screws
Screw
2-13 (E)