Sony SRX-R515P Installation Manual page 130

4. Move the 2D unit assembly under the 2D lens.
5. Determine the position of the stopper V so that the clearance between the lens cap and the resin
convex portion of stopper V is 1 to 2 mm with the lens base pushed as far as it will go.
6. Temporarily tighten the stopper V with the two screws.
PSW4 x 10
Cap
Stopper V
Lens front
portion
Stopper V
6-10 (E)
Stopper V
2D lens
2D unit assembly
2D unit assembly
Clearance with the
cap is about 1 to 2 mm.
Push the lens base to the
lens as far as it will go.
Lens Lens base
Lens base
SRX-R515P