In The Case Of Using Only 3D Lens; In The Case Of Using Both 2D Lens And - Sony SRX-R515P Installation Manual

5-6-2. In the Case of Using Only 3D Lens

Project the test pattern. (Frame Adjust)
Adjust the optical axis.
Project the test pattern. (Flat)
*Perform the image quality adjustment of Flat first.
Set the Image Mapping.
Adjust the image size (zoom) and focus of the left eye
image with the zoom ring and focus ring of the lower lens.
Adjust the image position in the vertical direction of the
left eye image with the shift screw of the lower lens.
If the shift amount is insufficient, tilt the projector.
(Perform the mask processing because a keystone occurs.)
Adjust the image position in the horizontal direction using
the touch panel.
If the shift amount is insufficient, change the projector direction.
(Perform the mask processing because a keystone occurs.)
Adjust the image size (zoom) and focus of the right eye
image with the zoom ring and focus ring of the upper lens.
Adjust the image position in the vertical direction of the
right eye image with the shift screw of the upper lens.
Adjust the image position in the horizontal direction using
the touch panel.
Align the horizontal position of the right eye image with
the left eye image using the touch panel.
5-6-3. In the Case of Using Both 2D Lens and 3D Lens
1. Perform "5-6-1. In the Case of Using Only 2D Lens".
2. Perform "5-6-2. In the Case of Using Only 3D Lens".
n
When the image is screened by 3D lens (without 2D lens screening), the procedure from "Perform the
DCDM color space conversion for the right eye image and the left eye image. (Perform in the state
without filter and 3D eyeglasses.)" is not required.
SRX-R515P
Set the color space mode of the right eye
image and the left eye image respectively.
Register the setting data to the function
memory as "3D FLAT".
Perform the image quality adjustment of Scope and HD
in the same procedure as Flat, and then overwrite
"3D SCOPE" and "3D HD".
Perform the DCDM color space conversion
for the right eye image and the left eye image.
Perform the 709 color space conversion for
the right eye image and the left eye image.
Adjust the brightness for each field angle of contents, and
overwrite the function memory "3D FLAT",
"3D SCOPE" and "3D HD".
The followings are the settings
for 2D showing using a 3D lens.
Perform the DCDM color space conversion for the right
eye image and the left eye image.
(Perform in the state without filter and 3D eyeglasses.)
Perform the 709 color space conversion for the right eye
image and the left eye image.
(Perform in the state without filter and 3D eyeglasses.)
Register the function memory "3D SCOPE" , "3D FLAT" and
"3D HD" to another function memory as "2D SCOPE (3D LENS)",
"2D FLAT (3D LENS)" and "2D HD (3D LENS)" respectively.
Adjust the brightness for each field angle of contents, and
overwrite the function memory "2D SCOPE (3D LENS)",
"2D FLAT (3D LENS)" and "2D HD (3D LENS)".
Set the color space mode of the function memory "2D SCOPE
(3D LENS)", "2D FLAT (3D LENS)" and "2D HD (3D LENS)"
and overwrite them.
5-15 (E)