5-13-4. Setting of GPIO
Perform the GPIO setting for operating the automation of a theater or accepting the signals from other
systems.
There are GPI and GPO in GPIP (General-Purpose Input/Output). GPI is used to accept a signal from an
external theater automation system. GPO is used to output a signal to a theater automation system.
It is necessary to set according to the information on which signal the theater automation system can send
and receive, and how the theater automation system and server are connected.
Creation of profile
1. Tap the "Configuration" tab.
2. Tap [System] → [GPIO|Profile].
[System]
Screen example
[GPIO|Profile]
3. Tap [New] in the Profile pane.
The New GPIO Profile Setting screen is displayed.
Screen example
5-48 (E)
Profile
Automation
pane
pane
GPIO Channel pane
SRX-R515P