Sony SRX-R515P Installation Manual page 140

2. Set the 3D unit assembly under the 3D lens as shown in the illustration.
3. Tighten the four hexagon socket head cap bolts evenly while lifting up the 3D unit assembly so that
there is no clearance at both right and left ends of the portions A and B when visually checked.
m
. If there is any clearance in portions A and B, the lens cannot be installed and removed smoothly.
Adjust the height so that the parts come in contact with each other lightly while checking the con-
tact pressure by moving the 3D unit assembly from side to side.
. The lens base is raised when the hexagon socket head cap bolts are rotated in clockwise direction
(2).
Hexagon socket
head cap bolts
(6 x 40)
Lens base
3D unit assembly
3D lens
3D unit assembly
6-20 (E)
3D lens
Portion B
Portion A
Hexagon socket head cap bolts
(6 x 40)
SRX-R515P