Check After Adjustment - Sony SRX-R515P Installation Manual

6-4-3. Check after Adjustment

1. Lift up the stopper and move the 3D unit assembly from side to side. Check that the 3D unit assembly
can be moved smoothly.
3D unit assembly
2. Move the lens base back and forth with the lock lever pushed in. Check that the two bosses can be
smoothly inserted into and removed from the hole under the 3D lens.
If the bosses cannot be smoothly inserted into and removed from the hole, perform "6-4-2. Height
Adjustment of 3D Unit Assembly" again.
Boss
Lens base
Lock lever
SRX-R515P
Stopper
Lens base
Hole
Lock lever
6-21 (E)