Required Equipment/Tools - Sony SRX-R515P Installation Manual

Digital cinema projector package
Hide thumbs Also See for SRX-R515P:
Table of Contents

Advertisement

1-3. Required Equipment/Tools

The equipment and tools required for this system are as follows.
Equipment/tools
Projection lens
3D lens filter
Lens change table
Lamp
Pedestal
UPS
Power cable
Exhaust system
External connection cable
Tool
Carrying handle
Luminance meter
Colorimeter
Tripod
Hexagonal wrench
Spanner
USB mouse, USB keyboard
SRX-R515P
Description
Prepare the necessary lens(es) in accordance with the installation
environment.
. LKRL-Z511
. LKRL-Z514
. LKRL-Z519
. LKRL-A502
. LKRL-A503
n
Regarding the selection of lens, contact your local Sony Sales Office/Service Center.
LKRA-005 etc.
LKRA-008
For enabling easy replacement of the 2D lens and 3D lens.
n
When installing the lens change table LKRA-008, refer to Section 6.
Prepare one of the following lamps in accordance with the installation environment.
. LKRM-U450 (6 pcs, 450 W)
. LKRM-U330 (6 pcs, 330 W)
m
. If all 6 pcs are not inserted, the projector does not operate.
. Regarding the selection of lamp, contact your local Sony Sales Office/Service
Center.
_
For the server
Need to obtain the cable that matches the plug on the installation site.
Connect the duct to the duct connecting portion on the rear top panel for exhausting
the heat inside the projector. In the case of using the 8-inch duct, the following exhaust
air volume is required.
The exhaust air volume of 450-550 ft
Refer to Section 4.
Screwdriver (for installing the lamp and server)
Handle arm (part number: 4-164-849-02)
Pipe (short) (part number: 4-164-850-02)
Pipe (long) (part number: 4-164-851-02)
CL-200 or the equivalent
PR-650 or the equivalent
For the colorimeter and illuminometer
For the 3D lens adjustment: subtense: 2.5, 3.0, 5.0 mm
For the lens shift adjustment: subtense: 5.0 mm
Subtense: 8 mm (supplied with the lens)
Subtense: 24 mm (for flexible leveler)
Subtense: 30 mm (for nut (M20))
For the connection setting with the external equipment such as audio processor and
UPS
3
3
/min (12.7 to 15.6 m
/min) should be secured.
1-3 (E)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents