Rack mounting
1. Check that the four feet are removed.
If they are not removed, remove them in the order of step 2 → step 1 in "3-1-2. Placing the Server on
the Pedestal".
2. Loosen the two screws (with drop-safe), then remove the front panel assembly.
Screw
(with drop-safe)
3. Mount the server on the rack with the four rack mounting screws.
Rack mounting screws
3-2 (E)
Front panel assembly
Rack
Server
Rack mounting screws
Screw
(with drop-safe)
SRX-R515P