Server; Connection Diagram - Sony SRX-R515P Installation Manual

4-2. Server

4-2-1. Connection Diagram

The control of audio processor is performed via the RS-232C and theater network (LAN).
m
. Be careful not to touch the cable core when connecting the cable to the GPIO connector and VGA
connector.
. Use the inch screw thread for the D-sub connector of the cable to be connected to GPIO.
GPIO cable
Theater equipment
control system
Theater equipment
control system
D-sub 25 pin (female)
Theater network (LAN)
Theater network (LAN)
Ethernet cables
SRX-R515P
Front of server
Rear of server
RS-232C cable
USB, HDD
USB cable
D-sub 25 pin (female)
Audio processor
4-3 (E)