3D lens filter position (vertical direction) adjustment
1. Remove the four adjustment screws.
2. Move the 3D lens filters in the vertical direction by changing the attachment position of the adjust-
ment screws removed in step 1.
Adjustment
screws
3D lens filter tilt adjustment
1. Loosen the two adjustment screws.
2. Tilt the 3D lens filter.
3. Tighten the adjustment screws.
5-28 (E)
Adjustment
screws
Adjustment screw
(this screw is also attached on the other side.)
3D lens filter
Adjustment
screws
3D lens filters
Adjustment
screws
SRX-R515P