Performing The Marriage - Sony SRX-R515P Installation Manual

5-4. Performing the Marriage

Before performing the installation adjustment, perform the marriage.
1. Tap the "Configuration" tab.
2. Tap [System] → [Marriage]1.
The Marriage screen is displayed.
3. Tap [Marriage]2.
The marriage is executed.
[System]
Screen example
[Marriage] 1
4. If "FAIL" is still displayed after 10 minutes have passed, take measures according to the following.
. Only the "Marriage" column is Fail:
. "Door Closed" column is Fail:
. "Projector Authentication" column is Fail: After the projector and server shutdown, perform OFF/
. "Security Board" column is Fail:
Screen example
5-12 (E)
[Marriage] 2
Contact your local Sony Sales Office/Service Center.
Check the installation of the cabinet of projector.
ON of the breaker of the projector and tap "Marriage".
If the state does not change after 10 minutes have
passed, contact your local Sony Sales Office/Service
Center.
Contact your local Sony Sales Office/Service Center.
Fail is displayed.
SRX-R515P