Initial Setting; Tpc Calibration Setting - Sony SRX-R515P Installation Manual

5-3. Initial Setting

n
Perform the initial setting before "5-4. Performing the Marriage".

5-3-1. TPC Calibration Setting

The touch panel monitor is adjusted.
1. Start up GUI. (Refer to Section 5-1-2.)
2. Tap the "Configuration" tab.
3. Tap [System] → [Server|Info].
The Server Info screen is displayed.
[System]
Screen example
[Server|Info]
4. Tap [TPC|Calibration].
The TPC Calibration dialog is displayed.
Screen example
5-6 (E)
[TPC|Calibration]
[Calibration]
SRX-R515P