Sony SRX-R515P Installation Manual page 127

18. Adjust the flexible levelers (S) by extending them so that the projector panel and base plate assembly
are perpendicular (90d) to each other on the right and left sides respectively.
n
Be sure to adjust the flexible levelers (S) so that they are perpendicular to each other. If not, the lens
shift pins do not fit when the lens is attached.
19. After completing the adjustment, securely tighten the eight hexagon PSW bolts shown in the encir-
cled portions.
20. Tighten the fixing nuts of the flexible levelers (S) until it touches the top, and lock them.
Nuts of flexible levelers (S)
SRX-R515P
Projector panel
Base plate assembly
Hexagon
PSW bolts
(8 x 25)
Hexagon
PSW bolts
(8 x 25)
Lens shift pins
90d
90d
Hexagon PSW bolts
(8 x 25)
6-7 (E)