5-14-9. Alignment of the Screen Position of Each Image (R, G and B)
The screen position of each image (R, G and B) is adjusted at the factory. Therefore, the adjustment is not
required. If the adjustment is required for some reason, perform it in the following procedure.
1. Tap the "Configuration" tab.
2. Tap [Projector|$2D%] or [Projector|$3D%] → [Adjust|Registration].
The Adjust Registration screen is displayed. (The screen example shows 2D screen.)
[Projector|$2D%]
Screen example
[Adjust|Registration]
3. Tap On in the Adjust Registration pane.
4. Adjust the screen position (horizontal and vertical) of each image (R, G and B) using [+][_] respec-
tively.
5-62 (E)
Configuration tab
Adjust Registration pane
SRX-R515P