5-1. System Startup and Login
5-1-1. Startup
When starting up the projection system, turn on the main power of the projector, start the server, and then
login to the system.
1. Set the power switch on the rear of the projector to ON (I) to turn on the power switch.
When the projector becomes standby state after the power is turned on, the MAIN indicator, LAMP
indicator, and IMB indicator light up in red.
2. Push the SYSTEM SW switch on the front of the server to turn on the power.
The POWER indicator lights up in green. When the server is started, the "Login" screen is displayed
on the monitor.
Projector
Power switch
SRX-R515P
Section 5
Setting and Adjustment after Connection
MAIN indicator
IMB indicator
LAMP indicator
Server
SYSTEM SW switch
POWER indicator
Touch panel monitor
Example of Login screen
5-1 (E)