Sony SRX-R515P Installation Manual page 92

m
. A GPIO channel setting is necessary to communicate with automation equipment conforming to an
eCNA protocol. (Refer to Section 5-13-4.)
. An audio processor registration is necessary for communication with an audio processor.
(Refer to Section 5-13-3.)
. An audio processor applicable to network control is only CP750.
. Enter 0.0.0.0 to the IP address of an unused port.
To register the IP addresses of other projection systems when controlling multiple pro-
jection systems using a computer
1. Tap [New] in the Other Auditorium pane.
The New Auditorium screen is displayed.
Screen example
[OK]
2. Select the Auditorium number and enter the IP address of the projection system to be connected.
3. Tap [OK].
5-42 (E)
SRX-R515P