Table of Contents
Advertisement
Making a Wireless
Connection with a
Computer
To prepare the computer
Prepare for a wireless connection on your
computer. For details, refer to the manual
supplied with your computer, online help, or
the Microsoft website.
Note
If the network cable is connected to the
computer, "Simple Setting" for a wireless
network connection cannot be used. In this
case, unplug the network cable from the
computer, or use the menu of the projector to
configure the wireless LAN connection,
referring to "Configuring the Network Settings
Using the Menu" on page 19.
Configuring Using Simple
Setting for Ad-hoc (Peer-to-
peer) Connection
Note
Data Encryption is not available when peer-to-
peer connection is made using "Simple
Setting." To encrypt data, see "Configuring the
Network Settings Using the Menu" on page 19.
1
Press the NETWORK key on the
remote commander.
The following menu appears:
®
Windows Vista
Network Projector
Projector not connected to network.
Set the Network setting
with Simple Setting or the Menu.
2
Press the v or V key to select "Simple
Setting" then press the ENTER key.
16
Making a Wireless Connection with a Computer
Simple Setting
Detail Information
Switch
Select:
Set:
The message "Simple Setting started."
appears on the screen.
3
Press the B key.
The following menu appears:
Simple Setting
Use Wireless network.
Select the Network Mode.
Ad-hoc
Access Point
Prev.:
Next:
4
Press the v or V key to select "Ad-
hoc" then press the B key.
Simple Setting
Simple setting completed.
Wireless Standard:
Network Name (SSID):
Close
Prev.:
5
Press the ENTER key to quit the
"Simple Setting" menu.
The "Network Name (SSID)" and
"Projector Name" are displayed on the
screen.
®
Windows Vista
Network Projector
Network Name (SSID):
SonyProj2EA509
Projector Name:
SonyProj99808B8
Network Address:
Projector Password:
Search for a projector or enter the "Network
address" and "Projector password" at
"Connect to a Network Projector" of
®
Windows Vista
.
The "Network Name (SSID),"
"Projector Name" and "Projector
Password" can be changed using the
menu. See "Configuring the Network
Settings Using the Menu" on page 19.
Select:
Exit:
802.11b/g
SonyProj2EA509
Set:
Exit:
Detail Information
Switch
Select:
Set:
Advertisement
Table of Contents
