Table of Contents
Advertisement
3.8.2 Testing the Min/Max Output
SIL Output Min/Max
Fire Low
Fire High
Percentage of Scale
Percentage of Scale
UNIT: %
0.00
3.8.3 Testing the Output Analog Switch
SIL Output Analog Switch
Open Switch
Close Switch
3.8.4 Viewing the On Board Temperature
On Board Temperature
28.75
3.8.5 Performing a Watchdog Test
Watchdog Test
No
Yes
CAUTION!
The Watchdog Test will reset the flowmeter and discard any program parameter changes. Do
not execute this test if you have changed parameter settings.
PanaFlow HT User's Manual
To test the minimum or maximum output, use the arrow keys to select
(minimum),
you have selected
Use the arrow keys to enter the desired percentage, and press
return to the SIL Testing menu.
From the SIL Testing menu, select SIL Output Analog Switch and press
the arrow keys to select
return to the SIL Testing menu. See the Safety Manual for more information.
To check the on board temperature, select
screen displays the current temperature. See the Safety Manual for more
information.
C
To conduct a watchdog test, select
keys to select
the results on the screen. Press
Manual for more information.
Fire High
(maximum) or enter a
Percentage of Scale
Open Switch
Watchdog Test
Yes
[
].
and press
The program runs the Watchdog Test, and displays
[
]
to return to the active display. See the Safety
Chapter 3. Initial Setup and Programming
Percentage of Scale
, the following screen appears:
Close Switch
or
, and press
On Board Temperature
[
and press
Fire Low
[
]
, and press
. If
[
]
]
. Press [
to
[
].
Use
[
]
]
. Press [
to
[
].
and press
The
].
Use the arrow
73
- Quick Links:
- Password
Hide quick links:
Advertisement
Table of Contents
