Program/Program Review; Program Review - GE PanaFlow HT User Manual

Chapter 3. Initial Setup and Programming

3.5.3 Program/Program Review

The Program and Program Review menus enables the setting up or viewing of several categories of information at
different security levels (see Figure 26 below). As discussed previously, the ability to edit parameters will depend on
the access level. The next section will explicitly state which access is required to edit parameters. To view all
parameters without editing, select
Display
Main Menu
General

3.5.4 Program Review

The Program Review menu requires no user password. However, it provides view-only access to the screens. To
change any setting or parameter, you must enter the Program Menu and supply a password at the appropriate level.
38
Program Review.
Note: Display either 1 variable, 2 variables, or totalizer.
Program
Factory
SIL Service
SIL Testing
Active
No
Settings
Display
Figure 26: Programming/Program Review Menu Map
(Service Access Level)
Sensor Setup
Calibration
Commissioned Factory
Settings
Settings
Factory
Advanced
PanaFlow HT User's Manual