Starting Or Stopping Totalizer Measurement; Resetting The Totalizer - GE PanaFlow HT User Manual

3.4.4 Starting or Stopping Totalizer Measurement

To start or stop totalizer measurements:
Total m^3
Fwd Batch 0.00
Rev Batch 0.00
E0
Total m^3
Fwd Batch 0.00
Rev Batch 0.00
E0
Total m^3
Fwd Batch 0.00
Rev Batch 0.00
E0

3.4.5 Resetting the Totalizer

To reset the totalizer:
Total m^3
Fwd Batch 0.00
Rev Batch 0.00
E0
Total m^3
Fwd Batch 0.00
Rev Batch 0.00
E0
PanaFlow HT User's Manual
From the display screen, press either the [] or [] buttons until the Start/Stop icon
(either an arrow icon for Start or a two-bar icon for Stop) is highlighted.
Once the value is highlighted, press
The icon then changes to the other alternative (start or stop).
From the display screen, press either the [] or [] buttons until the Reset icon (a
partial circle with an arrow) is highlighted.
Once the Reset icon is highlighted, press
Chapter 3. Initial Setup and Programming

[ ]
to start or stop totalizing.

[ ]
to reset the totalizer to 0.
35