Table of Contents
Advertisement
3.6.2c
Totalizer
Totalizer / Totalizer
Volumetric (Act)
Volumetric (Std)
Mass
PanaFlow HT User's Manual
To check and/or change totalizer measurement units, under UserPref/Flow Units,
use the [] or [] arrow key to select Totalizer and press
the following appears.
To remove Totals from display menus, use the [] or [] arrow key to select No
[
]
and press
. The screen returns to the previous display. To continue setting up the
Totalizer, select Yes, press Enter, and a screen similar to the following appears.
Use the [] or [] arrow key to select Actual, Standard or Mass totals, press
twice, and a screen similar to the following appears.
If no change is required, press
measurement category, and press
appears.
If no change is required, press
measurement type, press
ey twice to return to the UserPref/Flow Units screen.
] k
the [
Chapter 3. Initial Setup and Programming
[
]
. If change is required, select the appropriate
[
]
twice. A screen similar to the following
[
]
. If change is required, select the appropriate
[
]
, and the display returns to the previous screen. Press
[
]
. A screen similar to
[
]
45
- Quick Links:
- Password
Hide quick links:
Advertisement
Table of Contents
