Programming Digital Outputs - GE PanaFlow HT User Manual

3.7.3 Programming Digital Outputs

Digital Outputs are output circuits that are designed to be used as Pulse Outputs, Frequency Outputs, Alarms, or
Control Outputs. They have a flexible circuit design that can be modified by programming commands to perform these
different functions.
The sections that follow describe how to set up each type of function.
Note: In each function area, there is a way to change behavior based on an Error Condition. The User Manual,
Chapter 4, mentions several types of error conditions in the flowmeter. It may not be clear which errors will
trigger the Error Handling function. The guideline is that when an error message appears on the LCD, the
Error Handling function will trip.
3.7.3a Accessing the Digital Output Menu
8888
PanaFlow HT User's Manual
To access the Digital Outputs menu from the initial screen, use the arrow keys to
highlight the lock symbol and press
Use the arrow keys to select Program and press
appears.
Select a security level and press
Enter the appropriate password. Use the [] or [] arrow key to select each digit
to be changed, and the [] or [] arrow key to change the digit value. Then

[ ]
press . The following screen appears.
Select Setting and press the right arrow key. The following screen appears.
Chapter 3. Initial Setup and Programming

[ ]
. A screen similar to the following appears.

[ ]
. The following screen

[ ]
. The following screen appears.
57