GE PanaFlow HT User Manual page 77

3.7.3 Digital Output C (cont.)
3.7.3e Setting the Control Output (cont.)
PanaFlow HT User's Manual
To check and/or change the type of control output, in the Control Output menu,
select Control Output Type and press
Low
The control output activates when the measurement is less than or equal to a
High
threshold, while the
greater than or equal to a threshold.
High
for filling applications. To change the type of control output, select the

[
desired type and press
To check and/or change the measurement setup, in the Control Output menu,
select Measurement and press
Batch Total
supports fill and reset operations. The
user-specified number of kg of usage: for example, at 1000 kg, then 2000 kg,
etc.To change the measurement style, select the desired style and press
following screen appears.
Forward Reverse
Select or
both filling and draining. To change the measurement direction, select the desired

[ ]
direction and press . The screen returns to the previous display.
Chapter 3. Initial Setup and Programming

[ ]
. The following screen appears.
control output activates when the measurement is
Low
is useful for draining applications, and
]
. The screen returns to the previous display.

[ ].
The following screen appears.
totalizer, depending on the flow direction, or
Inventory Total
activates after a

[ ]
Net
. The
for
67