Status Bar - ABB OmniCore Operating Manual

2.2.2 Status bar

Overview
The following figure and table provides an overview of the user interface elements
that you can access from the status bar of the FlexPendant.
Label
A
B
C
QuickSet window
When you tap on the QuickSet button the QuickSet window is displayed. The
QuickSet window has the following tabs:
Operating manual - OmniCore
3HAC065036-001 Revision: D
Buttons
Messages button
Event logs button
QuickSet button
• Control
• Jog
• Execution
• Visual
• Info
• ABB Ability
• Logout/Restart
© Copyright 20192020 ABB. All rights reserved.
2 Navigating and handling the FlexPendant
Description
Tapping the Messages button displays the operator mes-
sages window. The operator messages window displays
the messages from robot programs. This usually happens
when the program needs some kind of operator response
in order to continue.
Tapping the Event logs button displays the event logs
window. The event logs window displays all the event logs.
The list allows you to filter the event log list according to
the category.
Tapping the QuickSet button displays the QuickSet window.
For more details see QuickSet window on page
2.2.2 Status bar
23.
Continues on next page
23