Accessing The Event Log - ABB OmniCore Operating Manual

9 Handling the event log

9.2 Accessing the event log

9.2 Accessing the event log
Open and close an event log
Use the following procedure to open the event log:
198
1 Tap the Event log icon on the status bar.
The Event Log page is displayed. It displays the event log list. By default the
event logs from the Common domain (category) are displayed.
2 Select a category in the list to filter the event logs.
3 Tap a log entry.
The selected event log message is displayed.
Note
Tap the Back button to go back to the Event Log list.
© Copyright 20192020 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: D